ALUBOND® can be cut with a vertical panel saw, circular or jig saw.
Use a standard guillotine for this purpose. Ensure the top cover sheet is inserted properly
Carbide tipped (CT) saw blades
Blade geometry |
Tooth thickness approx. 2 - 4 mm, tapered to the inside to prevent jamming |
Tooth geometry |
Trapezoid tooth / flat tooth |
Clearance angle α |
15° |
Rake angle γ |
10° positive |
Maximum feed s |
20 m/min |
Pitch t |
10 - 12 mm |
Carbide tipped (CT) saw blades for HOLZ-HER and Striebig circular panel saws.
Trapezoid/flat tooth saw blade, flat teeth 45° chamfered for burr-free edges.
|
Saw blade-Ø |
D = 300 mm (for Striebig vertical panel saw Standard II) |
| Number of teeth |
t = 72
Speiser Code No. 070 60 651 |
| Tooth thickness |
3.2 mm |
| Clearance angle α |
15° |
| Rake angle γ |
10 ° positive |
| Saw blade-Ø |
D = 250 mm |
| Number of teeth |
t = 60
Speiser Code No. 020 40 151 |
| Bore ø |
D = 30 mm |
|
Home page www.alubond.com.cn
