| Processing : Roll Bending |
 |
ALUBOND® plus can be bent using a roll bending machine (3 or 4 rollers). Make sure that the feeder does not exert too much pressure. Bending rollers which are also used for bending other metals must be thoroughly cleaned from swarf before processing ALUBOND® plus. Make sure to use only polished rollers free of dents and other defects.
To prevent damage caused to the panel surface, the protective peel-off foil must not be removed during bending. Additionally, the visible surface can be protected by using plastic pads of 1 - 2 mm thickness. |
|
|
Home page www.alubond.com.cn
